Contact type Plug-in

Own production and sales

The plug-in contact is suitable for the connection of withdrawable apparatus. It consists of a number of contact elements of silver-plated copper, set together in pairs with a strong spring in between. The design is carried out to allow a freedom of spring-directed movement in order to make the contact selfadjusting.

5216 042-A

5216 042-B

5216 042-C

5216 042-D

5216 042-E

Mounting

The plug-in contact is intended to be mounted on a bar with a thickness of 10 mm. The width of the bar is obtained from the ordering table below. For the fastening screws, a hole has to be drilled and tapped in the bar. A bar with the same dimensions and with a rounded or bevelled end is utilized as the male contact.

The plug-in contact has to be fastened with one screw at each side. The screw head is inserted into the guide holes in the frame sides. A suitable screw is for example a M5 hexagon socket head cap screw which has a head diameter of 8 mm. A hexagon head bolt (width across flats 8 mm) can also be used.

The contact element is designed so that the male contact can also be inserted from the side.

Contact force

The contact force, P, is 4 kp at each contact point of each contact pair as in the figur.

Temperature rises

When connections are done according to the figure, with silverplated bus bars with the stipulated dimensions and loaded with the rated currents given below, there is a temperature rise of maximum 45 °C.

Ordering table

Märkström A*	Avsedd för skena, mm	Tål max kortslutningsström kAtopp	En sekunds-strömkA	Antal kontaktpar	Bredd-mått B, mm	Passande skena bredd, mm	Beställningsnr	Ritningsnr	Vikt, kg
315	20 x 10	40	20	2	26	20	SK 312 9001	5216 042-A	0,23
630	30 x 10	70	30	4	36	30	SK 312 9002	5216 042-B	0,35
800	40 x 10	90	40	6	46	40	SK 312 9003	5216 042-C	0,45
1250	50 x 10	130	50	8	56	50	SK 312 9004	5216 042-D	0,55
1600	60 x 10	160	60	10	66	60	SK 312 9005	5216 042-E	0,70

Own production and sales